Gibson GCG91326XA Instrukcja Użytkownika Pobierz pdf (Strona 10)

WARNING!

Do not put unstable or damaged

pots on the burners to prevent from

spill and injury.

CAUTION!

Make sure that pot handles are not

above the front edge of the

cooktop.

CAUTION!

Make sure that the pots are placed

centrally on the burners in order to

get maximum stability and to get

lower gas consumption.

Diameters of cookware

WARNING!

Use cookware with diameters

applicable to the size of burners.

Burner Diameter of cook‐

ware (mm)

Triple Crown 160 - 260

Rapid 160 - 240

Semi-rapid 140 - 240

Auxiliary 120 - 180

Energy saving

• If it is possible, always put the lids on the

cookware.

• When the liquid starts to boil, turn down

the flame to barely simmer the liquid.

Hob - Care and cleaning

WARNING!

Refer to Safety chapters.

General information

• Clean the hob after each use.

• Always use cookware with clean bottom.

• Scratches or dark stains on the surface

have no effect on how the hob operates.

• Use a special cleaner applicable for the

surface of the hob.

• Wash stainless steel parts with water, and

then dry them with a soft cloth.

Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, and food with sugar. If not, the

dirt can cause damage to the hob.

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat

stains, shiny metallic discoloration. Clean

the hob with a moist cloth and some

detergent. After cleaning, rub the hob dry

with a soft cloth.

• To clean the enamelled parts, cap and

crown, wash them with warm soapy water

and dry them carefully before you put them

back.

Cleaning the spark plug

This feature is obtained through a ceramic

ignition candle with a metal electrode. Keep

these components well clean to prevent

difficult lighting and check that the burner

crown holes are not obstructed.

Pan supports

The pan supports are not resistant

to washing in a dishwasher. They

must be washed by hand.

1. Remove the pan supports to easily clean

the hob.

Be very careful when you

replace the pan supports to

prevent the hob top from

damage.

2. The enamel coating occasionally can

have rough edges, so be careful when

you wash the pan supports by hand and

dry them. If necessary, remove stubborn

stains with a paste cleaner.

3. After you clean the pan supports, make

sure that they are in correct positions.

4. For the burners to operate correctly make

sure that the arms of the pan supports are

aligned with the centre of the burner.

10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Komentarze do niniejszej Instrukcji

Brak uwag